MG Gloster, Manual, Page: 29 / 264

21 20
BEFORE YOU DRIVE
Automatic lifting function of driver door window
Your vehicle may be equipped with one-touch up/down or one-touch
down function. Button 1 has 2 levels: auto up/down and stroke up/down,
so it can conveniently control the window glass up/down process.
Briefly press the window button up or down to the second level, and the
window glass will automatically move up or down.
Resume the automatic up/down function
If the vehicle battery cable is re-connected after the disconnection, or
the battery was drained once, or the anti-pinch function has been
enabled for consecutive 3 times at the same position when the window
glass moves up, the automatic up/down function may not work, it must
Close all doors, pull up the window glass lifting button, until the window
is fully closed, hold the button for about several seconds after the
window is fully closed; then press the window glass lifting button until
the window is fully open, hold the button for about several seconds after
the window is fully open, the automatic up/down function will resume.
There is only 1 window switch on each occupant door , which can
only operate the corresponding occupant door window.
When operating, press the front part of the switch to open the window.
Pull the front part of the switch to close the window.
Note: Power windows can operate only when the ignition
Occupant door windows
BEFORE YOU DRIVE
Power Sunroof
Position 1 - panoramic sunroof Open switch.
Position 2 - panoramic sunroof Close switch.
Note: The opening and closing of panoramic sunroof has 2 gears:
tilt for ventilation and fully open, makes it easy to control the
opening and closing process of the sunroof. With the first gear of
the switch, the sunroof will be opened or closed to the tilt for
ventilation position, with the second gear of the switch, the
sunroof will be fully opened or closed. Meanwhile, both the
opening and closing of panoramic sunroof switch are equipped
with jog and auto function, make it easy to control the opening
and closing process of the sunroof. Short press the second gear of
he operating button, the sunroof will be automatically opened or
closed. Long press the first gear for jog function.
Position 3 sunshade Open switch.
Note: Both the opening and closing of sunshade switch are
equipped with jog and auto function, make it easy to control the
opening and closing process of the sunshade. Short press the
second gear of he operating button, the sunshade will be
automatically opened or closed. Long press the first gear for jog
Position 5 sunroof Slide Open switch. When the sunroof
slides open, release the button to stop the sunroof at the desired
position.
Position 6 sunroof Slide Close switch. When the sunroof
slides close, release the button to stop the sunroof at the desired
position.
Note: Both the opening and closing of sunroof switch are equipped
with jog and auto function, make it easy to control the opening and
closing process of the sunroof. Short press the second gear of he
operating button, the sunroof will be automatically opened or
closed. Long press the first gear for jog function.
Position 7 sunroof lilt Open switch. When the sunroof
tilts open, release the button to stop the sunroof at the desired position.
Position 8 sunroof Tilt Close switch. When the sunroof tilts
close, release the button to stop the sunroof at the desired position.
Position 4 sunshade Close switch