MG Gloster, Manual, Page: 24 / 264

17 16
BEFORE YOU DRIVE
Caution
When operating the power tailgate, ensure that no one is in the
opening and closing path of the tailgate, or you or others may be
injured. During washing your car, ensure that the remote key is kept
far away from the rear bumper detection area, for water flushing may
cause the tail gate opening. If the rear bumper is covered by a large
amount of ice and snow, dirt or similar materials, the Easy-Open Tail
Gate feature may be degraded or disabled, so please keep the
cleanliness of the rear bumper.
Tailgate height setting
Fully open mode
The fully open mode is the vehicle default mode.
Garage mode
For the garage mode, you need to press the tailgate garage mode switch
mode button at the reading lamp, and then the tailgate will be
opened to the set garage height in each opening. The default opening of
the tailgate in the garage mode is 75%.
Setting of the garage mode: manually open the tailgate to the desired
height, long press the tailgate interior panel switch button for 3 seconds,
if ticks are heard, it indicates that the setting is successful. Press the
garage mode switch, the tailgate will be opened to the garage height in
the following opening.
BEFORE YOU DRIVE
Emergency lock function of the tailgate
The tailgate has emergency lock function, in case of whole vehicle
power-off or other power tailgate failures, you may open the cover at
the lower end of tailgate interior trim panel, push the lever in it to
open the tailgate.
activated, be sure not to operate the tailgate, and wait for 1 minute,
and proceed the tailgate operation after the thermal protection
disappears.
If the tailgate encounters an obstacle in the power opening or closing
cycle, the tailgate will automatically move In the opposite direction to
avoid the obstacle. After the obstacle removal, you may operate the
power tailgate again. If the tailgate encounters obstacles for
consecutive 3 times in the power closing or opening process, the power
function will be disabled. After the obstacle is removed, manually close
the tailgate, and the normal power operation can be restored. The
anti-pinch sensor is located at the side of the tailgate, when the
tailgate is closed, if there is an obstacle between the tailgate and
vehicle and the sensor is squeezed, the tailgate will rotate 5° in the
opposite direction.
When operating the power tailgate, ensure that no one is in the
opening and closing path of the tailgate, or you or others may be
injured.
Tailgate follow-up movement strategy: when the power tailgate is in
the ajar position, It will be automatically closed when a force is applied
on it.
Please do not forcibly open or close the tailgate by hand in the power
operating cycle.
When the vehicle is on a ramp of 12 ° or above, please close the tailgate
with the assist of your hands, and please note that the closing action
must be slow, and do not close the tailgate rapidly and forcibly.
Note: For vehicle models with automatic transmission, only when
the shift lever is placed in "P" position can the power tail gate be
opened or closed.
If no operating instruction is received 15 minutes after the power
tailgate is opened, the tailgate enters the suspend mode. The
customer needs to close the door manually once to restore the
power mode. When the power tailgate is opened again, it can be
opened and closed electrically.
The power tailgate cannot be opened and closed electrically.
consecutively for 10 cycles, or the thermal protection may be
activated. If the tailgate thermal protection of your vehicle is