MI 3152(H)
Eurotest
XC (2,5 kV)
Technical specifications
191
12.27
General data
Power supply ......................................... 6 x 1.2 V Ni-MH battery cells, size AA
Operation ............................................... typical 9 h
Charger socket input voltage ................. 12 V
10 %
Charger socket input current .................. 1000 mA max.
Battery charging current ........................ 125 mA (normal charging mode)
725 mA (fast charging mode)
Measuring category ............................... 600 V CAT III
300 V CAT IV
Protection classification ......................... double insulation
Pollution degree ..................................... 2
Protection degree .................................. IP 40
Display .................................................. 4.3 inch (10.9 cm) 480x272 pixels TFT colour display
with touch screen
Dimensions (w
h
d) .......................... 23 cm
10.3 cm
11.5 cm
Weight ................................................... 1.3 kg, without battery cells
Reference conditions
Reference temperature range ................ 10
C ... 30
C
Reference humidity range ...................... 40 %RH ... 70 %RH
Operation conditions
Working temperature range ................... 0
C ... 40
C
Maximum relative humidity .................... 95 %RH (0
C ... 40
C), non-condensing
Storage conditions
Temperature range ................................ -10
C ... +70
C
Maximum relative humidity .................... 90 %RH (-10
C ... +40
C)
Locator
Locator .................................................. supports inductive mode
Maximum operation voltage ................... 440 V a.c.
Communication ports, memory
RS 232 .................................................. 115200 bits/s, 8N1 serial protocol
USB ....................................................... USB 2.0 Hi speed interface
with USB type B receptacle connector
Data storage capacity ............................ 8 GB internal memory
Bluetooth module ................................... Class 2
The error in operating conditions could be at most the error for reference conditions (specified in
the manual for each function) +1 % of measured value + 1 digit, unless otherwise specified in
the manual for particular function.
