page 86
Z589
Round Baler
10 F Bus CONTROL SYSTEM
This Chapter presents the F Bus electronic control system.
The control terminal enables the operator to set and monitor individual work stages of the machine: loading the
baling chamber with the product, increasing the bale diameter, the wrapping stage, bale release and closing the
machine to start the new work cycle.
10.1 F Bus SYSTEM COMPONENTS
The control system comprises the control modules which communicate with one another over F Bus and the
control terminal.
The control modules and their wiring are installed on the machine and available according to the machine
configuration:
•
PB
= POWER BOX
•
MF
= CORD module
•
MC
= CUTTING module
•
MR
= NET module
This
F Bus
electronic control system works with the following control terminal types:
EASYTRONIC
control terminal
The control terminal is installed in the tractor cabin. The LEDs, light indicators and display on the terminal are the
operator interface who operates the terminal to command the machine over its control modules.
Check what control terminal type will be used and follow the applicable operator's instructions
below:
•
Chapter
10-ET "EASYTRONIC CONTROL TERMINAL"
10.1.1 FUSES
The POWER BOX module PB houses the fuses, type RL MINI LAMA FASTON 2.8 mm, DIN 72581/3F.
See Chapter 11.9 "Fuses" for more information.
Summary of Contents for Z589
Page 130: ...page 127 Z589 Round Baler...
Page 143: ...page 140 Z589 Round Baler Notes...
Page 144: ...page 141 Z589 Round Baler...
