page 32
Z589
Round Baler
7.5 FUNCTIONAL TEST
CAUTION!
Before attempting any operation with the machine (running empty or with a bale), couple the
baler with the tractor.
Once the machine has been coupled as instructed above:
•
Check that the belts do not stick to the paint coating on the rollers.
•
Start the tractor motor with the PTO drive shaft decoupled and verify proper performance of all baler
movements.
•
Do functional tests of: the hydraulic system, the gate opening and closing movement, and the pickup lifting and
lowering movement (Note: you need to switch the pickup cut-off valve to
OPEN
to unlock the device for lifting).
•
Test the electrical connection to the controil terminal: operate the relevant F Bus button.
•
Do functional tests of the machine electrical systems: the turn indicators, parking lights and brake lights.
•
Close the baler gate and start the PTO.
CAUTION!
Before starting the PTO make sure that there are no persons or animals in its direct vicinity. Do
the first start carefully, while monitoring the performance of all mechanical and transmission
components.
Summary of Contents for Z589
Page 130: ...page 127 Z589 Round Baler...
Page 143: ...page 140 Z589 Round Baler Notes...
Page 144: ...page 141 Z589 Round Baler...
