page 28
Z589
Round Baler
7.3 HITCHING TO THE TRACTOR BEFORE BALING
Before connecting any component of the baler to a tractor, make sure that the tractor performance meets the
machine operating requirements, see Chapter 3.7 "Tractor requirements".
The baler tow bar can be adapted to the tractor towing assembly, which can be a standard hitch or an upper hitch.
In either case, the tow bar ring must be parallel to the ground.
DANGER! Before attempting any adjustment of the machine tow bar for hitching to the tractor:
•
Stop the tractor engine and remove the ignition key.
•
The machine must be completely detached from the tractor.
•
The machine support must rest on the ground.
• The machine must be secured against movement on a firm ground to avoid
accidental movement.
•
Turn off the F Bus system.
Follow all relevant safety standards explained in Chapter 4 "General safety standards".
7.3.1 STANDARD HITCHING
The machines supplied by
METAL-FACH
are compatible
with the
standard hitch arrangement
of the tractor.
If necessary, you can use the extension
P
for the tractor standard hitch if all restrictions shown in the diagram
are followed.
Max. 300
Summary of Contents for Z589
Page 130: ...page 127 Z589 Round Baler...
Page 143: ...page 140 Z589 Round Baler Notes...
Page 144: ...page 141 Z589 Round Baler...
