page 104
Z589
Round Baler
10-ET.5.5 MANUAL MOTOR CONTROL MENU
Use
+
,
-
,
R
and
L
to select the
Manual Motor Control Menu
icon from the
Home
screen and
confirm with
OK
.
The EasyTronic
Manual Drive Control Menu
enables you to manually control the
actuators installed on the machine. (The available icons vary with the installed
accessories.)
Use
R
and
L
to select an actuator icon.
•
Cord
Press and hold
+
to drive the cord wrapper arm into the baling chamber.
Use
-
to return the arm to its home position.
EasyTronic also enables simulating the cord wrapping cycle:
•
Press the
START-STOP
button.
•
Use
+
or
-
to select
YES
and confirm with
OK
to start the cord wrapping
simulation.
•
Net
•
Press and hold
+
to drive the net wrapper arm into the baling chamber.
•
Use
-
to return the arm to its home position.
EasyTronic also enables simulating the net wrapping cycle:
•
Press the
START-STOP
button.
•
Use
+
or
-
to select
YES
and confirm with
OK
to start the net wrapping
simulation.
•
Blades
This function enables modifying the status of the cutting assembly blades:
•
Press and hold
+
to drive the blades into the baling chamber (the cutting assembly
is engaged).
•
Use
-
to withdraw the blades from the baling chamber to their home position (the
cutting assembly is disengaged).
EasyTronic also enables simulating operation with the engaged cutting assembly:
•
Press the
START-STOP
button.
•
Use
+
or
-
to select
YES
and confirm with
OK
to start simulating a work cycle with the cutting assembly
engaged.
Summary of Contents for Z589
Page 130: ...page 127 Z589 Round Baler...
Page 143: ...page 140 Z589 Round Baler Notes...
Page 144: ...page 141 Z589 Round Baler...
