page 103
Z589
Round Baler
10-ET.5.4 MACHINE STATUS MENU
Use
+
,
-, R
and
L
to select the
Machine Status Menu
icon from the Home screen and confirm with
OK
.
The
Machine Status Menu
screen has three main sections:
1)
Icon;
2)
Icon description;
3)
Data display.
Use
R
and
L
to select an icon and then use
+
and
-
to select the menu text item and confirm with
OK
.
You can display different screens and read the data from various lists thereof:
•
Info
Operating data: total number of bales made by the machine and the total operating
hours.
Power:
Reads the voltage at which specific modules of the machine work.
Press
CANC
or
F2
(Exit) to exit the menu.
•
Precautions
Recent:
Shows the list of recent warnings displayed and stored by the machine (with
the warning type and date and time of display).
Use
+
and
-
to scroll the warning messages on the list (the numbers show the total
number of listed messages e.g. 03/15 is the third message of fifteen).
All:
Displays the whole list of EasyTronic warnings.
Each list page shows the warning type and the number of its actual instances, if any.
You can reset the number of display instances of specific warnings:
•
Press
F2
and use
+
and
-
to select the item:
Reset
= this will reset only the number of warning display instances shown on the
screen.
Reset all
= this will reset all warning instances in the
All
list.
To reset the selected item, press
OK
.
Press
CANC
or
F1
(Exit) to exit the menu.
•
Machine Test
This function tests the performance of sensors, proximity switches and potmeters
installed on the machine.
Press
CANC
or
F2
(Exit) to exit the menu.
•
Settings Check
This function tests the factory defaults of the machine settings.
The items on the list may vary with the machine configuration. Use
+
and
-
to select an
item and confirm with
OK
.
Press
CANC
or
F2
(Exit) to exit the menu.
Summary of Contents for Z589
Page 130: ...page 127 Z589 Round Baler...
Page 143: ...page 140 Z589 Round Baler Notes...
Page 144: ...page 141 Z589 Round Baler...
