page 43
Z589
Round Baler
8.7 JAMMING OF PRODUCTS
DANGER!
If the machine is jammed during field work, do not attempt to remove the product when the baler
is running.
8.7.1 CLEARING THE PICKUP AND THE RAKE (Z589-3 only)
The product is jammed between the rake and the pickup prongs.
CAUTION ! Before attempting to do ANYTHING to clear the machine:
•
Stop the tractor engine, remove the ignition key and wait until all moving
machine components stop completely.
•
Turn off the F Bus system.
•
Tilt the bracket
S
(on the left and right-hand sides), to release
and pull out the rake.
•
Put on protective work gloves and clear the product jam with
proper tools.
CAUTION!
Detach the brackets
S
with caution: the product stuck between the rake and the pickup may
cause the rake to spring up suddenly.
•
Once the gap has been completely cleared, reinstall the rake and secure it with the brackets
S
.
•
Once finished, you may restart the PTO.
If the pickup does not run, its safety shear bolt could be shorn.
Replacement instructions, see Chapter 9.2.1 "Replacing the pickup safety".
Example, RIGHT-HAND SIDE
Summary of Contents for Z589
Page 130: ...page 127 Z589 Round Baler...
Page 143: ...page 140 Z589 Round Baler Notes...
Page 144: ...page 141 Z589 Round Baler...
