MERLO P25.6, Instruction Manual

Page: 221 / 232

ATTACHMENTS SECTION 2 MODULE 3
M
M
3
3
-
-
Z
Z
M
M
2
2
-
-
0
0
3
3
(
(
E
E
N
N
)
)
53
TRANSPORTING THE ATTACHMENT FOR
CIRCULATION ON PUBLIC ROADS

WARNING

POSITIONING THE FLY JIB.
Positioning the fly jib in the housing on the RH
side of the machine requires two operators and
additional lifting attachment.
Pull the pin (T) and turn the front support (A)
outwards [figure 1].
Remove the wrench ® and the pins (P).
Connect the 2 lifting accessories at the specific
points (G) on the attachment (refer to section
LIFTING THE ATTACHMENT) [figure ].
Lift the attachment from the ground using the
additional lifting equipment [figure 2].
With the assistance of a second operator,
position the fly jib on the bar (A) of the rear
support inside the two specific seats [figure 3].
Lock the fly jib by inserting the two pins (P) and
relative wrenches ® [figure 4].