MERLO P25.6, Instruction Manual

Page: 210 / 232

MODULE 3 SECTION 2 ATTACHMENTS
42
M
M
3
3
-
-
Z
Z
M
M
2
2
-
-
0
0
3
3
(
(
E
E
N
N
)
)
To install the attachment on the carriage, insert
the STANDARD FORKS in the specific seats (A) for
side installation or (B) for front installation.
Lift the attachment and secure it to the forks using
the pins and the wrenches.
WARNING!
RISK OF ACCIDENTS!
Before using the attachment, make sure the pins
are locked correctly to prevent accidental exit
from their seats.
Bucket with hydraulic aperture
For the hydraulic connection, refer to MODULE 3

SECTION 2

INSTALLING THE ATTACHMENT

HYDRAULIC CONNECTION.

WARNING

LOAD CHART.
Refer to the load chart for the machine with
STANDARD FORKS assuming the load to be the
weight of the attachment plus the weight of the
material loaded inside.
For the controls of this attachment, refer to
MODULE 1

SECTION 3

JOYSTICK.
Bucket with manual aperture
Use the lever (L) to open and close the material
unloading hatch.
WARNING!
RISK OF ACCIDENTS!
Keep the concrete mixing bucket level during
use.
DO NOT SLANT the concrete mixing bucket to
perform material unloading operations.