MERLO P25.6, Instruction Manual, Page: 44 / 232

4 - CONTROLS AND INSTRUMENTS
4 - 14
The main screen shows the following information:
REF. DESCRIPTION
211 Percentage longitudinal stability limit
212 Maximum liftable load in the spot where the telescopic boom is (this value depends on the attachment)
213 Bar graph indicating the load effectively lifted in relation to the equipment installed
214 Height of the load from the ground (expressed in metres)
215
Distance between the external limit of the tyres (or of stabilizers, if available) (expressed in metres)
216 Telescopic boom lift angle (expressed in degrees)
219 Coloured indicator (green, amber, red) showing the position of the load being lifted on the carriage
220
Dynamic load chart depending either on the attachment installed on the machine (automatic identification) or
on the position of selector (204) (manual identification)
221 'Machine on tyres' indication
222 Image of the attachment installed on the machine and automatically identified by the system
224 Information on the weighing: operating mode, lift angle set by the operator, total weighing
225
In the MAN WEIGHING mode: manual weighing – In the AUTO WEIGHING mode: no command