MERLO P25.6, Instruction Manual

Page: 42 / 232

4 - CONTROLS AND INSTRUMENTS
4 - 12
• HEATER (35)
HEATER CONTROL KNOB (ITEM 35)
A
= increase temperature
C = decrease temperature
CAB HEATING FAN SWITCH (REF. 36)
The switch has three positions:
0
fan off
1 fan on, at speed 1
2 fan on, at speed 2
CAUTION!
Never place any objects behind the seat which may obstruct the air inlet of
the ventilation system.
SELECTION OF THE AIR SUCTION FROM INSIDE/OUTSIDE THE CAB
To select the air suction mode, operate on the relevant control reference "R",
placed behind the seat, as follows:
-
lever in "A" position (suction grid "C" not visible): air suction from the outside
of the cab
- lever in "B" position (suction grid "C" visible): air suction from the inside of the
cab (recirculation)
WARNING!
Do not put any object that could obstruct the air inlet of the ventilation
system "C" behind the seat.
• ROOF-MOUNTED BEACON (33)
Push the switch (33) to operate the roof-mounted rotating beacon.
Refer to the rules for road use described in the "STICKERS WITH CONTROL
DESCRIPTIONS - LEAFLETS IN THE CABIN" chapter, for instructions on the
use of this beacon. Local and national regulations may also apply.
• INDICATOR LAMP SHOWING THAT BUTTON (U) ON THE JOYSTICK IS
PRESSED (JOYSTICK ENABLE BUTTON)
Please refer to section "JOYSTICK ENABLING BUTTON (U)" in paragraph
"TELESCOPIC BOOM CONTROL JOYSTICK (1)".
DYNAMIC LOAD CONTROL SYSTEM (M-CDC)