MERLO P25.6, Instruction Manual

Page: 86 / 232

6 - ORDINARY MAINTENANCE
6 - 8
REAR BRIDGE (P)
Tighten to a torque of 45 Kgm (440 Nm) (325 lbft) the 6 "V2" screws which fasten the rear bridge to the frame.
To better understand the position of the "V2" screws which fasten the front (A) and rear (P) bridge to the frame, refer to the
drawing below:
• SCHEDULED MAINTENANCE AFTER THE FIRST 100 HOURS
CARDAN JOINTS
Grease the front (F) and rear (R) cardan jonts at the indicated points:
A – grooved profiles
B - crossings
HYDROSTATIC TRANSMISSION OIL FILTER
For information on the hydrostatic transmission oil filter replacement, refer to the specific paragraph "EVERY 500 HOURS".
HYDRAULIC OIL RETURN FILTER
For information on the hydraulic oil return filter oil filter replacement, refer to the specific paragraph "EVERY 500 HOURS".