MERLO P25.6, Instruction Manual, Page: 95 / 232

6 - ORDINARY MAINTENANCE
6 - 17
If the detected friction material thickness is less than 2 mm (1/12 in), pads must be replaced .
WARNING! The maintenance and replacement of brake pads must be carried out by skilled and competent
personnel. Contact Merlo Technical Support Service.
• TYRES AND WHEEL STUDS
Check tyre pressures with an accurate gauge,"A" = inflating valve.
Check studs (B), tighten to 28 Kgm (280 Nm).
WARNING !
The tyres which can be used on the machine are those indicated in the
Merlo List and/or in the machine registration document (if provided).
• CAB VENTILATION SYSTEM FILTER
To check its cartrdidge, follow the instructions below:
-
Unscrew fastening screws "V"
- Extract the cab ventilation filter
- Clean the filter using a jet of compressed air
- Check the filter wear condition and, if needed, replace it with a new filter with
the same features
• AIR INTAKE HOSES
Tighten all hose clamps (A) and
check conditions of hoses and
ducting.