MERLO P25.6, Instruction Manual

Page: 100 / 232

6 - ORDINARY MAINTENANCE
6 - 22
• UNIVERSAL JOINTS
Lubricate every 200 hours when used under heavy conditions.
FRONT AXLE
Universal joints between gear box and differentials :
F
Front universal joint
R Rear universal joint
Grease points shown in picture:
A
splines
B crosses
• FUEL TANK
Carry out the following operations to
discharge any water or sediment
from the fuel tank:
-
Place an appropriately sized
container underneath discharge
cap "A"
- Loosen discharge cap "A" using
an appropriate hexagonal wrench
- Discharge the water and
sediments contained in the tank
- Tigthen discharge cap "A".
Tighten to torque 15Nm (11 lbft).
• HYDROSTATIC TRANSMISSION OIL FILTER
Replace the hydrostatic transmission filter:
-
Place an appropriately sized container underneath filter "A"
- Loosen filter "A"; to carry out this operation, use an appropriate chain or
ribbon extractor
- Collect the oil that flows out
- Remove filter "A"
- Fill the new filter with specific oil through the appropriate outside holes
- Fill up the oil in the tank and wait for the air to flow out.