MERLO P25.6, Instruction Manual

Page: 228 / 232

MODULE 3 SECTION 2 ATTACHMENTS
60
M
M
3
3
-
-
Z
Z
M
M
2
2
-
-
0
0
3
3
(
(
E
E
N
N
)
)
Handle the machine's boom in order to
suspend the lifting accessory with the free end
at the specific lifting point of the attachment
(refer to MODULE 3

SECTION 2

LIFTING.
(OPERATOR 2) Couple the free end of the
lifting accessory to the attachment's lifting
point [figure 2].
Use the boom's movements to lift and handle
the attachment until it is coupled with the
support [figures 3 and 4]. (OPERATOR 2) From
the ground, manually guide the positioning of
the attachment until it is coupled on the
support.
Retract and lower the boom.
(OPERATOR 2) Remove the lifting accessory
MAINTENANCE
Every 50 hours of operation grease:
A) The block pin.
B) The cable lug coupling.
EVERY 1000 HOURS of operation, remove the
protective casing (1, 2, 3) using a 10mm hex
wrench and grease:
C) The cable.
D) The cable winder block screw.