MERLO P25.6, Instruction Manual

Page: 92 / 232

6 - ORDINARY MAINTENANCE
6 - 14
PERIODIC MAINTENANCE SCHEDALE
ITEM * EVERY 10 HOURS DESCRIPTION
Hydraulic oil Check level and top up
Hydrostatic transmission oil Check level and top up
Engine cooling system Check level and top up
Tyres and wheel bolts Inspect
Safety belts Inspect
ITEM * EVERY 50 HOURS DESCRIPTION
Boom sliding pads (Internal) Grease until it escapes around seal
Reduction hub articulation Greaser
Brakes pads Check wear
Tires and stud bolts Check pressure and stud bolts tightening
Air ventilation filter Clean
Air intake hoses Check connections
Battery Check electrolyte level and terminals
Air cleaner Clean
Brake oil Check level
Sliding pads of the telescopic boom (outer pads) Check
Plunger for quick uncoupling of attachments Greaser
Axle shaft bearings Grease
ITEM EVERY 500 HOURS DESCRIPTION
Hydraulic sump bleed filter Replace
Reduction hub oil Check level
Differential oil Check level
Cap screws and bolts Check tighten
Universal joints Grease
Fuel tank Drain water and sediments
Hydrostatic transmission oil filter Replace
Hydraulic oil filter on return line Replace
Air cleaner Replace
Sliding pads of the telescopic boom (inner pads) Check
Pipes-guide pipe Grease
Fuel filter Check
ITEM EVERY 1000 HOURS DESCRIPTION
Articulated joints Check the slacks and grease
Boom sliding pads (External) Grease until it escapes around seal
Anti-dust filter Replace
Hydraulic pipes/hoses Inspect
ITEM EVERY 1500 HOURS DESCRIPTION
Hydrostatic transmission oil Replace
Hydraulic oil Replace
Differential oil Replace
Reduction hub oil Replace
Brake fluid Replace