MERLO P25.6, Instruction Manual, Page: 213 / 232

ATTACHMENTS SECTION 2 MODULE 3
M
M
3
3
-
-
Z
Z
M
M
2
2
-
-
0
0
3
3
(
(
E
E
N
N
)
)
45
Loading the bucket manually
WARNING!
RISK OF ACCIDENTS!
DO NOT EXCEED the maximum capacity.
Tilt the bucket upwards to close the front
guard.
Turn the selector switch (MC) to position "2";
continuous propeller rotation is activated
(refer to MODULE 1

SECTION 5

CONTINUOUS DELIVERY OF HYDRAULIC OIL).
Fill with bulk cement through the specific grille
(A) or place a bag of cement on the blade (B)
to open it.

WARNING

MAXIMUM BUCKET CAPACITY.
Maximum capacity is reached with the carriage
in a vertical position, when the material reaches
the edge of the bucket (ref. MAX).
Unloading chute assembly
Work with the boom raised to about 1.5 m (59 in)
from ground level with the engine OFF.
WARNING!
RISK OF INJURIES!
DO NOT TAKE UP A POSITION underneath the
attachment during the following operations.
Extract the chute from the transport position
and release the bracket (1).
Insert the chute guideways (2) near the
material unloading hatch.