MERLO P25.6, Instruction Manual

Page: 85 / 232

6 - ORDINARY MAINTENANCE
6 - 7
TYRES AND WHEEL COLUMNS
Check the tyre pressure with a a pressure gauge and, if needed, inflate them
through valve "A".
The correct tyre inflation pressure is indicated on the sticker on the inside of the
wheel rim.
Check the correct tightening of the "B" wheel columns. If needed, tighten the
columns to a torque of 28 Kgm (280 Nm).
• SCHEDULED MAINTENANCE AFTER THE FIRST 50 HOURS
NUTS
AND BOLTS OF THE
STEERING COMPONENTS
FRONT BRIDGE (A)
Tighten to torque 30 kgm (220 lbft /
295 Nm) screws "A1" fastening the
jack to the bridge (4 screws).
REAR BRIDGE (P)
Tighten
to torque screws "P1"
fastening the jack to the bridge (4
screws).
NUTS AND BOLTS FASTENING THE BRIDGES TO THE FRAME
FRONT BRIDGE (A)
Tighten to a torque of 45 Kgm (440 Nm) (325 lbft) the 8 "V2" screws which fasten the front bridge to the frame.