MERLO P25.6, Instruction Manual

Page: 19 / 232

2 - MACHINE TECHNICAL SPECIFICATIONS
2 - 7
LOAD CHART
The load charts available on your machine, and shown in this manual, provide the different load capacity ranges of your
machine when equipped with standard forks. The centre of gravity of the load being transported is calculated 600 mm away
from the fork heel. Should other attachments be used in place of standard forks, please refer to the load charts contained in the
document holder in the cab, and shown in chapter "ATTACHMENTS" of this manual.
For a better comprehension of the load chart, please refer to the example below:
• A) Maximum permitted slopes
• B) Indication of the telescopic boom lift height
• C) Name of the machine represented in the load chart
• D) Indication of the telescopic boom lift angle
• E) Indication of the extending boom sections (marked with letters)
• F) Description of the attachment installed on the carriage (forks in this case)
• G) M-CDC switch position
• H) Indication of the centre of gravity of the load being lifted
• L) Indication of the tyres to be used for this load chart
• M) Indication of the telescopic boom extension length
• N) Pick and carry informations