MERLO P25.6, Instruction Manual, Page: 82 / 232

6 - ORDINARY MAINTENANCE
6 - 4
- FUEL TANK FILLING
Refuel with diesel at the end of each working day.
To carry out a correct refuelling procedure, follow these instructions:
-
Carefully clean the area of the fuel cap.
- Remove the fuel cap "T" by releasing its lock with the provided key.
- Insert the diesel fuel into the tank by making sure not to fill it up to its brim, as
it is necessary to leave some free space to accomodate for fuel expansion.
Immediately clean any spilled fuel.
- Screw the fuel cap "T" and close its lock with the provided key so as to
prevent any tampering.
Fuel tank capacity = 70 lt (18 gal)
WARNING! Handle the fuel with great care. Before refuelling with diesel, stop the engine.
Do not smoke while filling up the tank or while working on the fuel system.
Do not refuel or pour fuel in closed or nor sufficiently aired environments.
In the cold season, only use diesel additioned with winter additives.
• ANTI FREEZE
Refer to the relative engine workshop manual.
• OILS CHART - for use of the machine in normal temperatures (0°C, + 40°C) (32°F, 100°F)
WARNING! The oil to be used for replacement or topping up, may be selected from those recommended by the
manufacturer or other types available on the market, it must however comply with the characteristics indicated in the
table.
Although it is not possible to mix different oil brands, it is possible to top up the oil using a different brand to that
inside the system, providing that it complies with the specifications indicated and that the quantity required does not
exceed 10% of the total capacity of the system.
Different brand oil cannot be mixed.
Oil transportation and trade must be subject to European and local laws in force. Customers are kindly requested to
act for their supply following the mentioned rules. For check and replacement operations refer to the information in
the instruction handbook.
The oils chart is also enclosed, as a booklet, in container (21) inside the cab (please see Chapter "STICKERS WITH
CONTROL DESCRIPTIONS - LEAFLETS IN THE CABIN").
ENGINE OIL
SPECIFICATIONS
ENGINE SAE 10W-40 ACEA E3/E5/E7
COOLANT
COLOR: RED -35%-
TEMPERATURE UP TO -25°C
ASTM D4985
VW TL 774D
MB325.3
HYDRALUIC CIRCUIT OIL
ESSO MOBIL SHELL Q8 OILS SPECIFICATIONS
HYDRAULIC
HYDRO
HVI 46
UNIVIS N46
DTE 15 M TELLUS T 46 Q8 HANDEL-46
VISCOSITY at
40°C = 46cst
Iso 3448 = 46
SERVICE
HYDROSTATIC
TRANSMISSION
BRAKING CIRCUIT OIL
ESSO MOBIL SHELL Q8 OILS SPECIFICATIONS
BRAKING
CIRCUIT
BRAKE
FLUID
SUPER
MOBIL BRAKE
FLUID
BRAKE FLUID
DOT 4
In conformity
FM VSS 116
DOT 4