MERLO P25.6, Instruction Manual

Page: 99 / 232

6 - ORDINARY MAINTENANCE
6 - 21
• FRONT AND REAR DIFFERENTIALS OIL
Carry out the following operations to properly check the oil of the front and rear differentials:
FRONT AXLE (3)
-
Remove cap (A)
- Check that differential oil reaches up to the hole edge.
- If needed, fill up with specific oil (see the "OIL TABLE" in chapter "CONTROL
STICKERS - LEAFLETS IN THE CAB")
- Reinstall caps (A) and tighten them.
REAR AXLE (4)
• (P) = level plug
• (P1) = filling cap
-
Remove caps (P) and (P1); to access the caps (P) and (P1) on rear axle, you
need to remove COVER 8 first (see paragraph "COVERS" in this chapter).
- Check that the differential oil reaches the edge of the hole (P)
- If needed, fill up with specific oil from the hole (P1) (see the "OIL TABLE" in chapter "CONTROL STICKERS - LEAFLETS IN
THE CAB")
- Reinstall caps (P) and (P1) and tighten them.
• CAP SCREWS AND BOLTS
Check for tightness. See torque chart in this manual (section MACHINE TECHNICAL SPECIFICATIONS). In the paragraph
BREAK IN PERIOD you can find the instructions for the bolts and nuts check of some vehicle parts.