Mercedes-Benz Comand MY11, Operating Instructions Manual

Page: 90 / 194

X
Select Yes or No and press W to confirm.
If you select Yes , the entry is deleted.
If you select No , the process will be aborted.
Map operation and settings
Note
Company logos displayed on the map are
trademarks of the respective companies and
used solely for the purpose of indicating the
location of these companies. The use of such
logos on the map does not indicate approval
of, support of or advertising by these
companies for the navigation system itself.
Setting the map scale
X
To hide the menu: slide ZV the COMAND
controller and, when the Full Screen
menu item is shown, press W .
X
To call up the scale bar: as soon as you
turn cVd the COMAND controller, scale
bar = appears.
X
Turn cVd until the desired scale is set.
:
Set map scale as a number with unit
;
Currently set map scale as indicated by
the needle on the scale bar
=
Map scale
Unit of measurement : in the COMAND
display depends on the selection made for the
instrument cluster (see the vehicle
Operator's Manual).
Moving the map
Showing the crosshair
X
To hide the menu: slide ZV the COMAND
controller and, when the Full Screen
menu item is shown, press W .
X
To scroll the map: slide XVY , ZV Æ or
aVb the COMAND controller.
A crosshair appears on the map. If you slide
it again, the map moves in the
corresponding direction under the
crosshair.
Map with crosshair
:
Current vehicle position
;
Crosshair
=
Details of the crosshair position
?
Map scale selected
Display = may be the name of a street, for
example, provided the digital map contains
the necessary data. It may also show the geo-
coordinate position of the crosshair if the
Geo-coordinates display is switched on
(
Y
page 91).
Hiding the crosshair and centering the
map on the vehicle position or
destination
X
Press the k back button twice.
The crosshair disappears and the map is
set to the vehicle position.
or
X
Set the map to the vehicle position; see the
explanation below.
88
Map operation and settings
Navigat
ion
system