Mercedes-Benz Comand MY11, Operating Instructions Manual

Page: 25 / 194

Some jurisdictions prohibit the driver from
using a cellular mobile phone while driving a
vehicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximately
14 m) every second.
Operating the telephone
X
Switch on COMAND (
Y
page 34).
X
Call up the telephone basic menu
(
Y
page 107).
If the telephone has not yet been authorized,
the Bluetooth Ready message appears in
the multifunction display.
If the telephone is switched on and
authorized, the Phone Ready message
appears in the multifunction display.
Accepting a call
X
Press the 6 button.
If the telephone menu is displayed in the
multifunction display, the name or number of
the person calling appears.
Rejecting or ending a call
X
Press the ~ button.
Calling a number from the phone book
If your mobile phone can accept calls, you can
search for a number in the COMAND phone
book and call the number.
X
In the multifunction display, select the
phone menu using the = or ;
button.
The Phone Ready message appears in the
multifunction display.
X
Press the : , 9 or a button to
display the phone book.
X
Press the : or 9 button to select the
name you want.
The saved names are sorted alphabetically.
X
An exact phone number exists: press the
6 or a button to make the call.
The Connecting Call message and the
number dialed appear in the multifunction
display. The name also appears if it is
stored in the phone book. The phone
number dialed is stored in the Calls
Dialed call list (
Y
page 113).
The phone book entry appears in the
multifunction display when the call is
connected.
X
Several phone numbers exist: press the
6 or a button to display all the
phone numbers for the selected entry.
X
Press the : or 9 button to select the
phone number you want.
X
Press the 6 or a button to make the
call.
The Connecting Call message and the
number dialed appear in the multifunction
display. The name also appears if it is
stored in the phone book. The phone
number dialed is stored in the Calls
Dialed call list (
Y
page 113).
The phone book entry appears in the
multifunction display when the call is
connected.
i
If you press the : or 9 button for
longer than a second, the on-board
computer shows the names in rapid scroll.
Rapid scroll speeds up after four seconds.
It stops when you release the button again
or the end of the list is reached.
i
If you do not want to make a call, you can
close the phone book by pressing the
~ button.
Redialing
COMAND saves the last phone numbers or
names dialed.
Multifunction steering wheel
23
At
a
glance
Z