Mercedes-Benz Comand MY11, Operating Instructions Manual

Page: 143 / 194

:
Disc name (if stored on the disc)
;
Current folder
=
Folder icon
X
Select the folder by turning cVd and press
W to confirm.
You will see the tracks in the folder.
X
Select the track by turning cVd and press
W to confirm.
The track is played and the corresponding
folder is now the active folder.
Gracenote Media Database
Introduction
This function is only available in audio CD
mode.
There is a version of the software from
Gracenote ® , Emeryville, California, USA on
the hard disk. You will recognize this by the
logo which can be seen in the bottom right-
hand corner of certain audio displays.
Many audio CDs contain CD text. COMAND
uses the information contained therein to
display the artist, album and track name.
If the audio CD does not contain any CD text
information, COMAND can use the Gracenote
Media Database to identify unknown audio
tracks when running in audio CD mode. This
is only possible if the relevant information is
saved in the Gracenote Media Database and
if the "Gracenote Media Database" function
is activated.
If this is the case, COMAND will display the
corresponding data such as artist, album and
track name in the relevant displays and lists.
If COMAND accesses the Gracenote Media
Database when reading an audio CD, you will
see the following message:
Selecting Gracenote
®
data to be
displayed
If several entries exist for the CD of a
particular artist, you can select which of the
entries should be shown.
If the inserted CD does not contain any
Gracenote
®
data, the Gracenote Media
Database menu item is shown in gray and
cannot be selected.
X
Switch on audio CD mode (
Y
page 137).
X
Select CD by sliding V Æ and turning cVd
the COMAND controller and press W to
confirm.
X
Select Gracenote Media Database by
turning cVd the COMAND controller and
press W to confirm.
A menu appears.
The # dot indicates the current selection for
the display.
Audio CD/DVD and MP3 mode
141
Audio
Z