Mercedes-Benz Comand MY11 Page 165 Operating Instructions Manual Download

Page: 165 / 194

Notes about discs

Playback problems may occur when playing

copied discs. There are a large variety of

discs, DVD authoring software, writing

software and writers available. This variety

means that there is no guarantee that the

system will be able to play discs that you have

copied yourself.

Do not affix stickers or labels to the discs,

as they could peel off and damage

COMAND. Stickers can cause the disc to

bend, which can result in read errors and

disc recognition problems.

COMAND is designed to accommodate

discs which comply with the EN 60908

standard. You can therefore only use discs

with a maximum thickness of 1.3 mm.
If you insert thicker discs, e.g. those that

contain data on both sides (DVD on one

side and audio data on the other), they

cannot be ejected and can damage

COMAND.
Use round discs with a diameter of 12 cm.

Do not use discs with a diameter of 8 cm,

even with an adapter.

DVD playback conditions

If video DVDs do not conform to the NTSC or

PAL TV standards, they may create picture,

sound or other problems during playback.
COMAND can play back video DVDs

produced according to the following

standards:

region code 1 or region code 0 (no region

code)

If you insert a video DVD with a different

region code, you will see a message to this

effect.

PAL or NTSC standard

You will generally find the relevant details

either on the DVD itself or on the DVD case.

COMAND is set to region code 1 at the

factory. This setting can be changed at an

authorized Mercedes-Benz Center. This will

allow you to play video DVDs with a

different region code, provided that they

are produced in accordance with the PAL

or NTSC standard. The region code can be

changed up to five times.

Function restrictions

Depending on the DVD, it is possible that

certain functions or actions will be

temporarily blocked or may not function at all.

As soon as you try to activate these functions

or actions, you will see the

symbol in the

display.

Inserting and removing DVDs

Proceed as described in the "Inserting and

ejecting CDs and DVDs" section

(

page 134).

Activating video DVD mode

Option 1

Insert a video DVD.

COMAND loads the medium inserted and

starts to play it.

To display the picture: press the

button.

Video DVD mode

163

Video

Summary of Contents for Comand MY11



































































































































































































Search results

Summary of Contents for Comand MY11

Reviews:

Related manuals for Comand MY11

Brands by name

Popular brands

Mercedes-Benz Comand MY11, Operating Instructions Manual

Search results

Summary of Contents for Comand MY11

Reviews:

Related manuals for Comand MY11

Brands by name

Popular brands