Mercedes-Benz Comand MY11, Operating Instructions Manual, Page: 40 / 194

X
Select Logic7 ® On or Logic7 ® Off by
turning cVd the COMAND controller and
press W to confirm.
Depending on your selection, surround
sound is switched on or off and the menu
is exited.
X
To exit the menu without saving: press
the k back button or slide XVY the
COMAND controller.
i
Please note the following: for the
optimum audio experience for all
passengers when LOGIC7
®
is switched on,
the balance and fader settings should be
set to the center of the vehicle interior.
You will achieve the best sound results by
playing high-quality audio and video DVDs.
MP3 tracks should have a bit rate of at least
128 kbit/s.
Surround sound playback does not
function for mono signal sources, such as
the medium wave range (MW) in radio
mode.
Surround-sound playback does not
function for mono signal sources, such as
AM radio mode.
If radio reception is poor, e.g. in a tunnel,
you should switch off Logic 7
®
, as it may
otherwise switch between stereo and
mono and cause temporary sound
distortions.
On some stereo recordings, the sound
characteristics may differ from
conventional stereo playback.
Climate control status display
If you change the settings of the climate
control system (see the vehicle Operator's
Manual), the climate status display appears
for three seconds at the bottom of the screen
in the COMAND display. It displays the
current settings of the various climate control
functions.
The climate status display appears when:
X
You turn one of the two temperature
controls and set the temperature to the left
or right.
or
X
You press one of the following buttons:
K Increases air flow
I Decreases air flow
¿ Switches climate control on/off
á Switches the ZONE function on/off
à Switches on automatic climate
control
ñ Sets the climate control style to
automatic mode (FOCUS/MEDIUM/
DIFFUSE)
_ Sets the air distribution
¬ Switches on the defrost function
Ù Switches on maximum cooling
i
You can set the climate control style in
automatic mode with automatic climate
control.
i
The climate status display does not
appear when the image from the rear view
camera is displayed.
The climate status display in the COMAND display
(example)
38
Climate control status display
At
a
glance