Mercedes-Benz Comand MY11, Operating Instructions Manual

Page: 115 / 194

:
Selected data field with cursor
;
Character bar
X
Enter characters and save the entry.
Proceed as described under "Entering
characters" in the "Entering characters in
the address and phone books" section
(
Y
page 32).
i
The entry is created in the phone book
and in the address book.
Adding telephone numbers to an
existing phone book entry
X
Select an entry in the selection list by
turning cVd the COMAND controller.
X
Select Options by sliding VY and press
W to confirm.
X
Select Add Phone No. and press W to
confirm.
X
Select a category for the number, e.g.
Home , and press W to confirm.
X
Select a category for the phone, e.g.
Mobile Phone , and press W to confirm.
X
Select Save and press W to confirm.
COMAND stores the data if there are fewer
than five numbers assigned to the entry you
are searching for in the selected number
category.
If five numbers are stored for the entry in
the selected number category, a prompt
will appear asking whether you wish to
overwrite one of the existing numbers.
X
Select Yes or No and press W to confirm.
If you select Yes , a selection list will appear
containing the five existing numbers.
If you select
No , the process will be aborted.
X
Select the number to be overwritten by
turning cVd the COMAND controller and
press W to confirm.
An input menu appears. The data field for
entering the new phone number is
highlighted.
X
Enter characters and save the entry.
Proceed as described under "Entering
characters" in the "Entering characters in
the address and phone books" section
(
Y
page 32).
Using call lists
Introduction
COMAND supports the PBAP Bluetooth
®
profile. How COMAND processes call lists
depends on the model of the mobile phone
connected:
R Bluetooth
®
telephone with PBAP
Bluetooth
®
profile:
The call lists are downloaded automatically
from the mobile phone by COMAND as
soon as the mobile phone is connected to
COMAND.
R Bluetooth
®
telephone without PBAP
Bluetooth
®
profile:
COMAND creates the call lists from calls
dialed and received (including missed calls)
as soon as the mobile phone is connected
with COMAND.
i
If no mobile phone is found, then the
Call Lists menu item is grayed out and
cannot be selected. If you connect a mobile
phone other than the previous one to
COMAND, the previously available call lists
and their entries will be deleted
automatically.
Using call lists
113
Telephone
Z