Mercedes-Benz Comand MY11 Page 186 Operating Instructions Manual Download

Page: 186 / 194

Select

Display Track Information

using the

buttons and press the

button to confirm.

The function is switched on

or off

depending on the previous status.

Video DVD mode

General notes

Here you will find further information on the

following topics:

safety notes (

page 133)

notes on DVDs (

page 162)

DVD playback conditions

Playback problems may occur when playing

copied discs. There is a large variety of discs,

DVD authoring software, writing software and

writers available. This variety means that

there is no guarantee that the Rear Seat

Entertainment System will be able to play

video DVDs that you have copied yourself.
You will find further information in the Video

section (

page 163). Information regarding

COMAND also applies to the Rear Seat

Entertainment System.

Function restrictions

Depending on the DVD, it is possible that

certain functions or actions described in this

section will be temporarily blocked or may not

function at all. As soon as you try to activate

these functions or actions, you will see the

symbol in the display.

Inserting and removing a CD/DVD

Proceed as described in the "Audio CD/

DVD and MP3 mode" section

(

page 179).

Activating video DVD mode

Insert a video DVD.

The Rear Seat Entertainment System loads

the disc.
If disc mode was the last mode selected, it

will now be active.
If it was not, switch on video DVD mode as

described in the following instruction.

Select

Disc

in the menu using the

9=;

buttons on the remote

control and press the

button to confirm.

If the video DVD fulfills the playback

criteria, the film either starts automatically

or the menu saved on the DVD appears. If

the DVD menu appears, you must start the

film manually.

Select the corresponding menu item in the

DVD menu.

Hiding/showing the navigation menu

To show: press the

button

on the remote control.

To hide: press the

button.

Wait for approximately eight seconds.

Navigation menu

Disc type

;

Current track

Current scene

Track time

To show the menu

184

Video DVD mode

Rear

Enterta

inment

System

Summary of Contents for Comand MY11



































































































































































































Search results

Summary of Contents for Comand MY11

Reviews:

Related manuals for Comand MY11

Brands by name

Popular brands

Mercedes-Benz Comand MY11, Operating Instructions Manual

Search results

Summary of Contents for Comand MY11

Reviews:

Related manuals for Comand MY11

Brands by name

Popular brands