Mercedes-Benz Comand MY11 Page 191 Operating Instructions Manual Download

Page: 191 / 194

Activating AUX mode

AUX drive

Select

Aux

in the menu using the

9=;

buttons on the remote

control and press the

button to confirm.

The AUX menu appears.

AUX menu

Select

Source

from the AUX menu and

press the

button to confirm.

Select

Disc drive Aux

and press the

button to confirm.

You will hear and see the content of the

external video source if it is connected to

the CD/DVD drive and switched to

playback. If no video image is available

from the AUX source connected, you will

see an audio menu.

Displaying AUX

Select the screen to which an external

video source is connected and which you

would like to operate with the remote

control (

page 24).

Select

Aux

in the menu using the

9=;

buttons on the remote

control and press the

button to confirm.

Select

Source

from the AUX menu and

press the

button to confirm.

Select

Display Aux

and press the

button to confirm.

You will see and hear the content of the

video source if it is switched to playback. If

no video image is available from the AUX

source connected, you will see an audio

menu.

Selecting the active COMAND source

Select

Aux

in the menu using the

9=;

buttons on the remote

control and press the

button to confirm.

Select

Source

from the AUX menu and

press the

button to confirm.

Select

COMAND

and press the

button to

confirm.

The audio or video mode selected in

COMAND is transmitted to the Rear Seat

Entertainment System.

Operation with an active COMAND

source

You can transfer an audio or video mode

selected in COMAND to the Rear Seat

Entertainment System.

If you subsequently switch modes in

COMAND, the new source will not be

transmitted to the Rear Seat Entertainment

System.

To switch on the function in COMAND:

switch on the desired audio mode in

COMAND or show the menu in video DVD

mode.

Select the menu item at the bottom left,

e.g.

in audio CD mode, by sliding

and turning

cVd

the COMAND controller

and press

to confirm.

Select

Active Aud./Vid. Source for

the Rear

and press

to confirm.

AUX mode

189

Rea

rEnter

inment

Syst

Summary of Contents for Comand MY11



































































































































































































Search results

Summary of Contents for Comand MY11

Reviews:

Related manuals for Comand MY11

Brands by name

Popular brands

Mercedes-Benz Comand MY11, Operating Instructions Manual

Search results

Summary of Contents for Comand MY11

Reviews:

Related manuals for Comand MY11

Brands by name

Popular brands