Mercedes-Benz Comand MY11 Page 27 Operating Instructions Manual Download

Page: 27 / 194

COMAND: e.g. to select a station from the

presets, select a track, direct entry, phone

number entry

Rear Seat Entertainment System: to

select a track, direct entry

To exit a menu (back)

Point the remote control at the

corresponding screen and execute the

functions by pressing the corresponding

button.

The remote control's function may be

restricted depending on the angle at which

it is pointed at the respective screen.

Selecting the screen for the remote

control

To select the COMAND display: turn

thumbwheel

until COMAND is

highlighted in the window.

To select the left-hand screen (Rear Seat

Entertainment System): turn thumbwheel

until L REAR is highlighted in the

window.

To select the right-hand screen (Rear Seat

Entertainment System): turn thumbwheel

until REAR R is highlighted in the

window.

Switching the screen on/off

If the SmartKey is in position 0 or 1 in the

ignition lock (see the vehicle Operator's

Manual), or the SmartKey is not inserted, the

screens in the rear will switch off after 30

minutes. Before the screens switch off, they

show a message to this effect.
You can switch the screens back on.

However, this will discharge the starter

battery.

Point the remote control at the screen

which has been selected for remote

operation.

Press button

on the remote control.

The respective screen (rear or COMAND)

switches on or off.

You can only switch the screens on using

the remote control if the ignition is

switched on.

Switching the button lighting on/off

Press button

;

on the remote control.

Depending on the previous status, the

button lighting is switched on or off.

If you do not use the remote control for

about 15 seconds, the button lighting

switches off automatically.

Mute

This function is available for COMAND and for

the Rear Seat Entertainment System in

conjunction with corded headphones.

Press button

on the remote control.

The sound is switched on/off.

Adjusting the volume

This function is available for COMAND and for

the Rear Seat Entertainment System in

conjunction with corded headphones.

Press one of buttons

on the remote

control.

The volume of the currently selected audio

or video source changes.
For COMAND, you can also adjust the

volume of phone calls and navigation

announcements.

Remote control

glance

Summary of Contents for Comand MY11



































































































































































































Search results

Summary of Contents for Comand MY11

Reviews:

Related manuals for Comand MY11

Brands by name

Popular brands

Mercedes-Benz Comand MY11, Operating Instructions Manual

Search results

Summary of Contents for Comand MY11

Reviews:

Related manuals for Comand MY11

Brands by name

Popular brands