Mercedes-Benz Comand MY11 Page 155 Operating Instructions Manual Download

Page: 155 / 194

iPod

is a registered trademark of Apple

Inc., Cupertino, California, USA.

Supported iPod

variants

The following are examples of supported

iPod

variants:

iPod

mini

iPod

nano

iPod

classic

iPod

touch

Supported USB devices

The following USB devices are supported:

USB sticks (flash memory)

USB hard drives requiring a startup/

permanent current of a maximum of

800 mA (it may be necessary to connect a

separate power supply)

certain MP3 players

The Media Interface supports USB

storage media of "USB Device Subclass 6".

Information concerning USB Device

Subclass 6 is available from the equipment

manufacturer.

For details and a list of supported devices,

visit http://www.mbusa-mobile.com. Or

call the Mercedes-Benz Customer Assistance

Center at

1-800-FOR-MERCedes(1-800-367-6372) (for

the USA) or Customer Relations at

1-800-387-0100 (for Canada).

Connecting an external device

Do not leave external devices in the

vehicle as their correct function cannot be

guaranteed if they are subjected to

extreme temperatures, e.g. if subjected to

direct sunlight or very low outside

temperatures (see the operating

instructions of the respective device).

Mercedes-Benz USA, LLC accepts no

liability for damage to external devices.

Never connect more than one device at a

time. You will otherwise not be able to play

back from the external device.

Four-pin socket for ⅛ inch stereo jack,

e.g. for MP3 players (audio and video)

;

iPod

plug, to connect an iPod

USB socket, to connect USB devices

Example of device, iPod

Connect the external device with suitable

socket

;

COMAND activates the device.

If you remove a device, the

No Device

Connected

message appears.

A connected iPod

or MP3 player should

not be simultaneously operated via the

Media Interface and the remote control

(e.g. Bluetooth

remote control), as this

may produce unpredictable results.

Connecting a fully discharged iPod

MP3 player can result in an extended

initialization period.

Malfunction messages appear while the

device is being activated if:

COMAND does not support the device

connected (

External Device

Unavailable

the connected device consumes too much

power.

the Media Interface connection is faulty.

Consult an authorized Mercedes-Benz

Center if required.

Media Interface mode

153

Audio

Summary of Contents for Comand MY11



































































































































































































Search results

Summary of Contents for Comand MY11

Reviews:

Related manuals for Comand MY11

Brands by name

Popular brands

Mercedes-Benz Comand MY11, Operating Instructions Manual

Search results

Summary of Contents for Comand MY11

Reviews:

Related manuals for Comand MY11

Brands by name

Popular brands