Bulb fo r turn signal, parking, side
marker and standing lamp
(21/5 W /32/3 cp):
Loosen plastic nut (4) and remove
housing tow ards the front.
Turn bulb socket (7) w ith bulb co u n
terclockw ise and pull out. Push bulb
into socket, turn co unterclockw ise
and remove.
Bulb fo r high and low beam
(Halogen type 9004):
Com press cover (5) at the to p and
remove upwards. Pull o ff electrical
co n n e cto r (8). Turn clam ping ring (9)
counterclockw ise and pull out bulb
to gether with clamping ring. Remove
bulb.
Insert new bulb (flat side facing up),
m ount clamping ring (9) (with tab fa c
ing down) and turn clockwise. Push
electrical co n n e cto r on securely.
Fog lamp bulb (Halogen type H 3 ):
Com press the retaining clip of the
cover(6) at the to p while removing it
upwards. Pull o ff electrical co n n e cto r
(11). Disengage retaining clip and
remove bulb (10). When replacing
cover (6), make sure it clicks into
place.
Replacing bulbs:
Taillamp Assemblies
1
Side m arker lamp (10 W /6 cp)
2 Turn signal lamp (21 W /32 cp)
3
Stop lamp (21 W /32 cp)
4 Tail, parking and standing lamp
(10 W /6 cp)
5
Backup lamp (21 W /32 cp)
<
Turn both locks in the trunk to the left
as far as the stop and detach lamp
bracket. To replace the bulbs,
depress, turn to the left and remove.
75
