D39303 | Date 09/2018
53
Menu mode
3. With the turn control, select the desired
setting – in this example OFF (
).
Keysound
At the end
If door open
On alarm
Sound
4. Save the setting by pressing the confir-
mation key.
If an acoustic alarm sounds, it can be
turned off by pressing the confirmation
key.
Keysound
At the end
If door open
On alarm
Sound
7.8
Protocol
The appliance continually logs all relevant measured values, settings and error messages at
1-minute intervals. The internal log memory is of the continuous memory type. The logging
function cannot be switched off and is always active. The measured data are stored in the
appliance, safe from manipulation. If the power supply is interrupted, the time of the power
failure and voltage recovery are stored in the appliance.
You can export the protocol data for different periods to a USB storage medium via the USB
port or, via Ethernet, import them to the AtmoCONTROL software for graphical representa-
tion, print-out or storage.
The log memory of the appliance is not modified or deleted by reading it out.
1. Connect the USB storage medium to the
USB port on the right of the Control-
COCKPIT.
2. Activate the protocol. To do so, press
the activation key on the right side of
the
PROTOCOL
display. The display is
enlarged and the period
This month
au-
tomatically highlighted. To select another
logging period, use the turn control.
Protocol
12.10.2012 12:00
control range
3. Save your selection by pressing the confir-
mation key. The transfer starts and a
status symbol indicates the progress.
Protocol
This Year
Complete control range
This Month
4. As soon as the transfer is complete, a
check mark appears in front of the period
selected. You can now remove the USB
storage medium.
Protocol
This Year
Complete control range
This Month
Summary of Contents for HCP105
Page 1: ...HCP OPERATING MANUAL HUMIDITY CHAMBER HCP...
Page 59: ......
