D39303 | Date 09/2018
27
Operation and control
5.5.4
Manual mode
In this operating mode, the appliance runs in permanent operation at the values set on the
ControlCOCKPIT.
Adjustment options
As described in chapter 5.5.2 , you can set the following parameters after pressing the cor-
responding activation key (in any sequence):
Temperature
Adjustment range: +18
°
C to +90
°
C
Heating operation is indicated by the symbol.
You can select °C or °F as the temperature units displayed (see
page 44).
22
.4
37
.0
TEMP
Set
°C
°C
Humidity
Adjustment range: 20 to 95 % rh
Humidification is indicated by the symbol.
Dehumidification is indicated by the symbol.
When the appliance heats up, the humidity is dynamically adjusted
to approach the setpoint depending on the dew point of the
interior temperature.
HUMIDITY
70
%rh
Set
34
% rh
5.5.5
Operation with digital backwards counter with target time setting,
adjustable from 1 minute to 99 days ( timer)
In timer operation, you can adjust the time the appliance runs at the set values. The appliance
has to be in manual operating mode for this.
1. Press the activation key to the left of
the timer display. The timer display is
activated.
TIMER
-
Ende 9:00 23.11.
--
h
-
m
2. Turn the turn control until the desired
duration is displayed – in this example 4
hours 30 minutes. The approximate end
time is shown beneath, in a smaller font.
TIMER
End
0
13:30 23.11.
04
m
h
3
Up to a duration of 23 hours 59 minutes, the time is displayed in hh:mm (hours:minutes)
format. For 24 hours and more, the format dd:hh (days:hours) is used. The maximum
duration adjustable is 99 days 00 hours.
3. Press the confirmation key to confirm.
Summary of Contents for HCP105
Page 1: ...HCP OPERATING MANUAL HUMIDITY CHAMBER HCP...
Page 59: ......
