D39303 | Date 09/2018
13
Construction and description
Ethernet interface
Via Ethernet interface, the appliance can be
connected to a network, so that you can trans-
fer programs created with the AtmoCONTROL
software to the appliance and read out proto-
cols. The Ethernet interface is located on the
rear of the appliance (Fig. 5).
For identification purposes, each appliance con-
nected must have its own unique IP address.
Configuration of the IP address is described on
page 43.
You will find a description of how to transfer programs via Ethernet in the enclosed
AtmoCONTROL manual.
The appliance can be directly connected to a computer / laptop using an optional USB to
Ethernet converter (see Optional accessories on page 16).
2.7
Designation ( nameplate)
The nameplate (Fig. 6) provides information about the appliance model, manufacturer and
technical data. It is attached on the upper right behind the door (see page 10).
Typ: HCP240 F.-Nr.: H818.3008
230 V~ 50/60 Hz
8.0
1840 W
DIN12880-Kl.3.1 Nenntemp.: 18-90 °C
1
2
3
4
5
6
10
8
9
7
Fig. 6
Nameplate (example)
1 Type
designation
2 Operating
voltage
3 Applicable
standard
4 Protection
type
5 CE
conformity
6 Address of manufacturer
7 Disposal
note
8 Temperature
range
9 Connection / power ratings
10 Appliance number
Fig. 5
Ethernet interface
Summary of Contents for HCP105
Page 1: ...HCP OPERATING MANUAL HUMIDITY CHAMBER HCP...
Page 59: ......