© Martin Engineering GmbH
24
M3699UK-11/13
Maintenance
.
8. Clean all warning labels. Replace any warning labels that can-
not be read. Warning labels may be purchased from Martin En-
gineering or an authorised dealer.
9. Remove all tools from the working area.
10. Switch on the conveyor belt.
NOTE
Check or adjust the wear at least once a month. The scraper
blades must always have adequate contact with the conveyor belt.
NOTE
If there are any signs of degrading operation, turn off the relevant
part of the conveyor belt system. To receive support, contact Mar-
tin Engineering or a representative. DO NOT operate the conveyor
belt until the reason for the problem is known and a solution is
found.
CAUTION! DANGER OF DAMAGE!
Do not let the scraper blades wear out beyond the wear line, it can
cause serious damage to property.
Inspect scraper blades regularly and replace in time!
CAUTION! FLYING PIECES!
Tools or installation parts that are left behind can fall from a moving
conveyor belt and cause slight injuries and property damage.
After the installation, first remove tools from the installation area
and from the conveyor belt before applying power.
WARNING! DANGER OF INJURY!
Body parts and/or clothing may get caught and pulled in by rotat-
ing parts or by the moving conveyor belt.
Do not touch or reach into the conveyor belt system and its acces-
sories during its operation.
Summary of Contents for DT2H
