![background image](http://html1.mh-extra.com/html/martin/dt2h/dt2h_installation-manual_1732845036.webp)
© Martin Engineering GmbH
26
M3699UK-11/13
Maintenance
5.3
Replacing the scraper blades
1. Move the tensioner in completely. Next, pull out the locking pin
(Fig. 20, 1), which locks the scraper blade cartridge at the op-
erator side of the shaft. Pull at the grip (Fig. 20, 2) in order to
remove scraper blade cartridge from the shaft and from the in-
stallation console. Pull out the scraper blade cartridge com-
pletely from the shaft. Place the cartridge on a level and stable
surface.
WARNING! DANGER OF INJURY!
Body parts and/or clothing may get caught and pulled in by rotat-
ing parts or by the moving conveyor belt.
Before any installation or maintenance work is carried out, ensure
that all power sources to the conveyor belt system and its accesso-
ries are switched off and secured against inadvertent reactivation.
Use warning signs!
Abb. 18: Replace the scraper blade
2
1
Summary of Contents for DT2H
