© Martin Engineering GmbH
6
M3699UK-11/13
Introduction
1.2
Appropriate Use
The Martin
®
DT2H main scraper can be used only for cleaning a
conveyor belt in the lower section of a conveyor belt system. In do-
ing so, the scraper must be installed immediately behind a head
drum or counter pressure roller.
It can be used in conveyor belts having a maximum belt width of
3,000 mm and maximum conveyor speed of 6.1 m/sec.
Any other use of this product is deemed to be inappropriate. If you
would like to use the product described here for any other purpose,
please contact customer service at Martin Engineering. We shall be
pleased to assist you with the product configuration.
1.2.1
Conveyor belt systems with open transfer systems
This installation manual describes the installation on a conveyor belt
system with an encapsulated delivery system. For the installation on
open delivery systems different MARTIN
®
installation consoles can
be used.
If installation conditions prove to be difficult, as is the case with im-
passable static components, or using the head drum as the tension
point, Martin Engineering or a representative can help with the posi-
tioning or find customized solutions.
1.2.2
Use in EX-protection areas
Under certain circumstances the product described here can also be
used in potentially explosive areas. Contact Martin Engineering for
more information on use in potentially explosive areas.
The use of the scraper in a device protection category that is higher
than that specified or under operating conditions other than those
specified by Martin Engineering is not permissible or may be done
only if Martin Engineering has granted its approval.
1.2.3
Operating limits of this product
The use of the product mentioned here is allowed only within the
specifications given above. Using it in a higher than specified equip-
ment category or under operating conditions other than those
named and previously specified by Martin Engineering is considered
to be inappropriate use and can only be carried out if approved by
Martin Engineering.
If the MARTIN
®
D2H main scraper needs to be used for a different
purpose, then Martin Engineering or one of its representatives can
help with the product configuration.
Summary of Contents for DT2H
