![background image](http://html1.mh-extra.com/html/martin/dt2h/dt2h_installation-manual_1732845025.webp)
© Martin Engineering GmbH
15
M3699UK-11/13
Installation
4.2.7
Tensioning the blade
Adjusting the spring tensioner
1. Loosen the locknut over the spring on both sides.
2. Turn the adjusting nut (best on both sides simultaneously) until
the scraper blades touch the conveyor belt only slightly.
3. Check whether the scraper blades have the same distance to
the conveyor belt.
CAUTION! DANGER OF DAMAGE!
Damage can occur if the tension of conveyor belt scraper on the
conveyor belt is too high or uneven.
Only tension the conveyor belt scraper according to the guidelines
and with dual spring tensioners, ensure even tension.
Abb. 11: Spring tensioner - loosening the locknut
Locknut
Adjusting nut
Summary of Contents for DT2H
