© Martin Engineering GmbH
6
M3699UK-11/13
Installation
4.2
Installation of the MARTIN
®
D2H main scraper
4.2.1
Determining the installation position
The position of the middle axis of the conveyor belt scraper must be
determined on both sides of the chute wall. In the process, the posi-
tions are determined where the shaft of the conveyor belt scraper
passes through the chute wall or where the spring tensioner is in-
stalled on the chute wall.
The conveyor belt scraper is supplied along with a spring tensioner.
This is disassembled at the factory prior to delivery and is reassem-
bled during installation along with the conveyor belt scraper.
The installation of the conveyor belt scraper and the spring tensioner
is described in this installation manual.
Following is an overview of the installation steps:
It is possible to have different local conditions at the time of installa-
tion that require different working steps, which are illustrated below:
Installation on an encapsulated delivery system
• Carry out the instructions according to 4.2.2.
Installation on an encapsulated delivery system where installation
openings and supports for the conveyor belt scraper are already
present.
• Carry out the instructions in 4.2.3.
Installation on an open delivery system
Use the local resources to ensure that the dimensions for the instal-
lation are correctly maintained.
1. Prior to commencing installation of the conveyor belt system,
switch off and de-energise the conveyor belt and all accesso-
ries and secure them against being switched on inadvertently.
The conveyor belt scraper should ideally be installed near a
head drum or counter pressure roller. The distance should not
be more than 100 mm.
2. Determine the midpoint position of the scraper axis as de-
scribed below for the conveyor belt scraper.
No.
Installation step
Instruction
1 Determining the installation position
M3699
2 Installation of the spring tensioner
M3699
3 Installation of the conveyor belt scraper
M3699
4 Tensioning the conveyor belt scraper
M3699
Tab. 1: Installation steps
Summary of Contents for DT2H
