![background image](http://html1.mh-extra.com/html/martin/dt2h/dt2h_installation-manual_1732845019.webp)
© Martin Engineering GmbH
9
M3699UK-11/13
Installation
4.2.3
Installing the scraper
4. Insert the cleaner shaft into the installation console. To do this,
slide the shaft through the installation console and the opening
in the chute wall from the operator side.
5. Next, push the scraper shaft out through the shaft arresting
mechanism of the installation console on the opposite side.
Abb. 3: Sliding in the scraper axis
NOTE
The side of the shaft with the openings must be installed on the
installation console on the operator side. The shaft must be
installed in such a manner that the opening right at the end of the
shaft points to the installation console.
Abb. 4: Arresting the scraper shaft (1)
Summary of Contents for DT2H
