![background image](http://html1.mh-extra.com/html/martin/dt2h/dt2h_installation-manual_1732845030.webp)
© Martin Engineering GmbH
20
M3699UK-11/13
Installation
3. Remove all tools and fire protection covers from the installation
area and conveyor belt.
4. Carry a one hour test run of the conveyor belt system.
5. After the test run for an hour, shut down the conveyor belt sys-
tem, switch off the power supply and secure it against being
switched on again inadvertently.
6. Make sure that all securing parts are tightened. Tighten loose
connections.
7. Check the conveyor belt scraper for the following points:
•
Wear and tear
: a little wear and tear is normal, as soon as
the wiper blades have got adjusted to the contour of the
conveyor belt, this stops happening.
•
Material accumulation
: No material should have
accumulated between the cleaner blades and on the return
side.
CAUTION! FLYING PIECES!
Tools or installation parts that are left behind can fall from a moving
conveyor belt and cause slight injuries and property damage.
After the installation, first remove tools from the installation area
and from the conveyor belt before applying power.
WARNING! DANGER OF INJURY!
Body parts and/or clothing may get caught and pulled in by rotat-
ing parts or by the moving conveyor belt.
Before any installation or maintenance work is carried out, ensure
that all power sources to the conveyor belt system and its accesso-
ries are switched off and secured against inadvertent reactivation.
Use warning signs!
CAUTION! DANGER OF DAMAGE!
Never operate the conveyor belt scraper for more than 14 minutes
on the running and unloaded conveyor belt when it is fully ten-
sioned. There is the risk of the conveyor belt scraper getting dam-
aged and/or the conveyor belt getting damaged by overheating.
Operate the conveyor belt scraper with full tension against the con-
veyor belt only when it is running and fully loaded.
Summary of Contents for DT2H
