© Martin Engineering GmbH
5
M3699UK-11/13
Installation
4
Installation
4.1
Safety instructions
NOTE
Read this section completely before beginning any work!
WARNING! DANGER OF INJURY!
Body parts and/or clothing may get caught and pulled in by rotat-
ing parts or by the moving conveyor belt.
Before any installation or maintenance work is carried out, ensure
that all power sources to the conveyor belt system and its accesso-
ries are switched off and secured against inadvertent reactivation.
Use warning signs!
WARNING! EXPLOSION HAZARD!
In enclosed areas there is an increased risk of explosion when
using a cutting torch or welding equipment!
Before use, check the level of gas and dust in the air.
NOTE
Install the spring tensioner on the side that is most easily accessi-
ble. The side that is most easily accessible is called the "operator
side" in this manual, while the other side is called the "opposite
side".
Summary of Contents for DT2H
