User Guide
45
3 Select the device for which you want to
change the IR / RF settings.
The IR / RF setting page appears.
The reversed color button labeled “
IR
”
indicates that the selected device is cur-
rently operated with IR signals.
4 Tap “
RF
” button. The IR/RF settings for
the selected device are
changed from IR to RF.
When you have
several RX-77s
to operate
devices, you have to assign the correct Extender ID to the selected
device. Continue with
Step 5
.
-or-
When you have only
one RX-77
, you can accept the default
settings for the Extender ID and the Channel. Skip to
step 6
.
Note
The ID on the RF Extender has to match the Extender ID on the
Remote Control.
5 Press
and
buttons beside the
Extendor ID
label to change the
Extender ID number.
The RC5400 offers 16 Extender IDs.
6 Tap “
Done
” to save the IR/RF settings
for the selected device or Press the
Right function button labeled “
Cancel
” to
return without changing the IR/RF set-
tings for the selected device.
7 Repeat instructions 1 to 3 for all devices
for which you want to change the IR/RF settings.
8 Tap
label to return to the Mode menu page.
The RC5400 is configured to operate the devices you have set
with RF signals.
9 Return to USE mode by pressing the Left function button
labeled “
Exit
” and try out the devices for which you just changed
the IR/RF settings.
Note
It is possible that a device does not respond properly when
operated with RF signals. In that case, you have to reconfigure the
Remote Control to operate the device with IR signals again.
Reference
