User Guide
27
Reference
You cannot program
HOME
page buttons directly. You have to
program them using “Learn DEVICE” function (see page 28).
The RC5400 also offers empty control panel buttons which you
can program and label as existing buttons. They are visible in
USE mode as grayed-out.
Programming Touch Screen Buttons
1 Tap and hold the Mode icon
in the Lower Tool Bar more
than 3 seconds. Mode menu page will appear.
2 Tap the “
LEARN
” button to switch to the LEARN mode.
3 Select the “
Learn BUTTON
” button
and then navigate to the device page
which contains the button you want to
program.
4 Point the device
’
s original remote
control to the RC5400
’
s learning eye
as shown on page 26.
5 Tap the button you want to program
on the RC5400.
“
Learning
” will be displayed on
the Device Overview button and the button’s color is reversed.
6 Press and hold the corresponding button on your device
’
s ori-
ginal remote control.
If the RC5400 has learned the command successfully, “
OK
”
appears on the Device Overview button. You can let go of the
button you
’
re holding. If the RC5400 has not learned successful-
ly, you hear a short buzz and “
Failed
” appears.
7 Program all other buttons you want and relabel them if necessa-
ry (see page 30-31).
8 Return to the Mode menu page by tapping
label in the
Lower Tool Bar.
