User Guide
17
Customizing your RC5400
7 Switch back to
DELETE
mode and delete the device if it is not a
good match to your component. Repeat steps 4 through 7 until
all of your remote controls have matching devices.
8 Switch to
LABEL
mode to relabel each device
(see page 30-32).
9 Switch to
MOVE
mode to re-order your devices, so that your
home panel is arranged the way you want (see page 39).
10 Switch to
LABEL
mode to relabel any buttons as needed to
match your existing remote controls. Check all of your devices.
12 Switch to
LEARN
mode and teach the RC5400 all of your non-
Marantz components
’
RC Codes (see page 26-30).
13 Switching back and forth between
USE
and
LEARN
modes, test
all codes and reteach as necessary.
Note
Should you need to delete a command, use the DELETE mode.
Be very careful to NEVER delete the jump tabs; they can only
be restored with a personal computer (see page 46-47).
14 Switch back to LEARN mode. Teach each Device the appropria-
te Preamp/Receiver Input (source switching) IR command (see
page 28) as the Device Action.
Congratulations! You have completed the first stage of customiza-
tion. Take a well deserved break.
