Modes
The RC5400 has different
“M
odes
”.
When you activate the RC5400
for the first time, it starts up in
USE
mode allowing you to immedia-
tely operate your devices. In
USE
mode, the center of Lower Tool
Bar displays the Mode
icon .Tap and hold the Mode icon
more than 3 seconds. The Mode menu page will appeares. If the
center of Lower Tool Bar shows another icon, like
, tap it to
reveal the Mode menu and press the Left function button labeled
“
Exit
” to return to USE mode.
Note If you do not see the Mode icon; it has been deactivated via the
Setup. Press and hold the center of Lower Tool Bar to override
the Mode menu deactivation.
Your RC5400 is capable of displaying hundreds of different control
pages. RC5400 presents you various ways to navigate to the speci-
fic device and page easily.
Navigating the Devices
Home
—
The Home Page displays
convenient
instant jump
buttons
to the main control page of your
system devices (your Amp., TV, DVD
player etc.). These buttons
also select the Input of your Home
Theater Receiver or Preamp.
Access Home page by
tapping the Home button
at the bottom left of the remote.
l
Device buttons in the Home page perform two actions
when pressed;
1,
Jumps to the main page of the Device.
2,
Changes your home theater receiver/preamp to the
appropriate input. To program for a non-Marantz
receiver/preamp, see page 28.
User Guide
Getting Started
2.
Navigating the RC5400
7
