User Guide
53
Frequently Asked Questions
How do I calibrate the Touch Screen?
The RC5400 is calibrated when it leaves the factory, so normally
you do not have to calibrate it yourself. It is possible that the
RC5400 displays a message to calibrate the Touch Screen. If this
message appears do the following.
1 Tap the INFO
button in the Upper Tool Bar.
The information page will appear.
2 Tap the “
SETUP
” button in the Information page.
The first Setup page appears.
Navigate to third Setup page by using the
Page +
and
Page -
buttons.
3 Tap the “
CALIBTATION
” button.
4 Tap as close as possible the upper left corner using a blunt tip
of a pencil.
You will see the instruction
“
Touch TOP LEFT corner
”.
5
Tap as close as possible the upper left corner using a blunt tip
of a pencil.
You will see the instruction
“
Touch BOTTOM RIGHT corner
”.
6 Tap as close as possible the bottom right corner using a blunt tip
of a pencil.
You will see the message “
Calibration succeeded
”.
7 Return to USE mode by tapping the INFO
button again or
press the Left function button labeled “
Exit
“.
